Nearly 300 Liner Feet of Retaining Wall Wraps Up a Massive Property

Some jobs don't wrap up in a single phase. This was one of them. We finished the backside of a large retaining wall we started earlier this year - and when all was said and done, we were looking at nearly 300 liner feet of wall tying the entire property together. That's a serious amount of hardscaping work.

Here's what we were working with: a long, open stretch of ground running along the back of the property with no real structure holding things in place. Without a proper wall system, you've got soil movement, erosion, and a landscape that never quite looks finished. The goal was to bring everything together with a clean, continuous wall that matched what was already in place up front.

We ran a Bobcat alongside the run to handle grading and soil work while the crew used a plate compactor to get the base solid before any block went down. That's not optional on a job this size - a bad base on a 300-foot wall shows up fast. Getting the grade right and the compaction consistent is what keeps a wall looking straight and performing for the long haul.

The finished wall runs the full length of the back of the property, tying into the existing landscaping on either side. Established trees, rock beds, and shrubs now have a defined edge holding everything in place. What was a rough, unfinished stretch of ground is now a structured border that makes the whole property feel intentional and complete.

Projects like this are a good example of what happens when excavation and grading work hand-in-hand with hardscaping. You can't build a wall right without getting the ground right first. We take both seriously, which is why walls we install hold their line and don't shift over time.